אנימציית הרכבת שלט עם AI: מדריך פרומפט מעשי

Create a 5-second clean, photorealistic signage assembly animation using the uploaded reference image.

This is a VFX assembly effect on a static scene, not a redesign or regeneration. The camera position, framing, focal length, perspective, depth of field, background architecture, [name each locked background element], lighting character, and color grade remain unchanged. The final frame must be identical to the uploaded reference image.

OPENING STATE [0.00-0.35]
Show the reference scene without [list every sign element that is absent]. Preserve clean background detail where those elements will appear. Keep the camera nearly locked with a slow micro-drift.

STRUCTURE [0.35-1.25]
Bring in only the large structural elements: [bars, bracket, housing, or panel]. Each travels along the correct scene plane, eases into alignment, and stops cleanly. The hardware arrives unlit. No impact, bounce, overshoot, dust, or camera movement.

SMALL ELEMENTS [1.25-2.30]
Resolve [letters, emblem, or small marks] one at a time at their exact final positions. Each begins near 40% opacity with soft blur and about 3% extra scale, then becomes fully sharp with its final depth and contact shadow over two or three frames. No element travels across the frame. Once resolved, it remains still.

ILLUMINATION [2.30-3.30]
Light the elements in this order: [order]. For each element, bloom softly from the edges and then fill the face over 0.30 to 0.40 seconds. No flash frames, flicker, or strobing.

SETTLE [3.30-4.30]
Let the light spill, contact shadows, and reflections reach their final appearance without changing the background.

FINAL HOLD [4.30-5.00]
Hold the complete sign at full, even illumination. Match the uploaded reference image exactly.

MOTION RULES
Large elements may travel. Small elements resolve in place. Keep final positions, spacing, baseline, letterforms, extrusion depth, and side returns fixed. No reflow, morphing, dust, debris, particles, smoke, sparks, lens flare, shake, push-in, orbit, bounce, recoil, overshoot, wobble, or new background objects.

STYLE
Clean Motion Graphics, Photorealistic, Precise Assembly, Dimensional Signage, Smooth Edge-Bloom Ignition, Architectural Environment, High Contrast

Create a 5-second photorealistic letter-by-letter signage reveal using the uploaded reference image.

This is a VFX effect on a static scene, not a redesign. Keep the camera, framing, focal length, perspective, depth of field, building, facade panels, windows, lighting, pavement, sky, reflections, and color grade unchanged. Only [WORDMARK] animates. The final frame must match the uploaded reference exactly.

[0.00-0.40] The wordmark is absent. Preserve the clean facade and every background detail.
[0.40-4.20] Resolve the characters one at a time in this order: [CHARACTER ORDER]. Give every character an explicit time range. Each character appears in place at its final coordinates, begins at about 40% opacity with soft blur and 3% extra scale, then becomes fully sharp with its final depth and contact shadow within two or three frames.
[4.20-4.60] Bring the completed wordmark to steady illumination.
[4.60-5.00] Hold the exact reference frame.

Keep every character's position, spacing, scale, and baseline fixed from the moment it resolves. No reflow, re-centering, sideways movement, morphing, flicker, dust, camera shake, push-in, or new background objects.

Create a 5-second photorealistic signage reveal using the uploaded reference image.

Preserve the complete static scene, camera, framing, perspective, wall texture, seams, floor reflections, lighting, and monochrome or color grade. The final frame must be identical to the reference.

[0.00-0.40] Show the clean background without the sign elements.
[0.40-2.30] Move one wide, soft light front across the scene along [LOGO AXIS]. The band should cover about one-third of the frame. As the light clears each final position, resolve that element in place from a soft 40% opacity ghost to full sharpness and depth within two or three frames. Nothing except the light travels.
[2.30-3.30] Return illumination along the same axis in reverse. Bloom from each element's edges, then fill its face smoothly.
[3.30-4.20] Let contact shadows and reflections reach their final density.
[4.20-5.00] Hold the exact reference frame.

The light front moves once at a steady rate. No stutter, reversal, repeated sweep, dust, particles, lens flare, shake, bounce, morphing, or background changes.

Create a 5-second photorealistic reveal for externally lit dimensional signage using the uploaded reference image.

Keep the camera perfectly locked. Preserve the wall, panel seams, spotlight fixtures, floor lights, surrounding architecture, shadows, reflections, and final color grade. The final frame must match the reference exactly.

[0.00-0.55] Begin at about 25% brightness. The wall structure remains visible, but all practical lights are off and the sign elements are absent.
[0.55-1.20] Turn on the visible spotlights one at a time in [ORDER]. Each lamp warms up smoothly over three frames and creates its final pool of light.
[1.20-2.40] Resolve the main letters in place, one at a time, from soft ghost to sharp dimensional form.
[2.40-3.60] Resolve the secondary mark or wordmark at a tighter cadence.
[3.60-4.45] Raise the floor lights and settle every cast shadow and reflection.
[4.45-5.00] Hold the exact reference frame.

No flying letters, strobing, repeated lamp ignition, camera motion, dust, smoke, new reflections, or shifting wall seams.

Create a 5-second photorealistic logo reveal using the uploaded reference image.

Treat the reference as the final frame. Preserve the camera, crop, perspective, background geometry, surface texture, lighting, reflections, and grade.

[0.00-0.60] Show the final scene without [CURVED HERO SHAPE]. Keep all other approved elements fixed.
[0.60-3.10] Draw the shape continuously along its real geometry, beginning at [START POINT] and ending at [END POINT]. The leading edge carries one restrained specular highlight. The form thickens and tapers exactly like the reference while its dimensional depth and cast shadow resolve directly behind it.
[3.10-4.20] Bring the completed shape to its final material and lighting.
[4.20-5.00] Hold the exact reference frame.

The shape grows along its own curve and never travels across the frame. No branching, shape mutation, second drawing pass, particles, camera shake, overshoot, or background repainting. If the taper changes after one retry, keep the final shape present and animate it in compositing instead.

Create a 5-second restrained photorealistic emblem reveal using the uploaded reference image.

Keep the camera, framing, perspective, background, material, lighting, reflections, and color grade unchanged. The final frame must be identical to the uploaded reference.

[0.00-0.70] The emblem is absent. Preserve clean background detail beneath it.
[0.70-2.80] Resolve the complete emblem in place. Begin with the full silhouette at about 35% opacity and soft blur. Increase contrast and sharpness evenly over about 0.5 seconds per visual layer: outer contour, main internal shapes, then fine line work. Do not redraw individual strokes in a new shape.
[2.80-3.80] Resolve the final depth, edge highlights, and contact shadow.
[3.80-5.00] Hold the exact reference frame.

No travel, rotation, stroke mutation, added ornament, flicker, particles, camera motion, or changes to the background. Preserve every line and proportion from the reference.

Create a 5-second photorealistic channel-letter sign assembly using the uploaded reference image.

This is a VFX assembly on a static scene. Preserve the camera, framing, focal length, perspective, depth of field, wall, seams, storefront, floor, ceiling, reflections, ambient light, and grade. The final frame must match the uploaded reference exactly.

[0.00-0.35] Show the bare mounting surface without the sign, its depth, illumination, shadows, or reflections.
[0.35-1.25] Install only the large hardware: [BARS, BRACKET, HOUSING]. Move each part along the correct scene plane and ease it to a clean dead stop. All hardware arrives unlit.
[1.25-2.30] Resolve every letter in place at its final coordinates. Use the 40% opacity ghost-to-sharp method over two or three frames.
[2.30-3.30] Ignite the hardware and letters in [ORDER]. Bloom softly from the edges, then fill each face over 0.30 to 0.40 seconds.
[3.30-4.30] Settle the light spill, contact shadows, and reflections.
[4.30-5.00] Hold the exact reference frame.

Keep spacing, baseline, letterforms, extrusion depth, and side returns fixed. No dust, debris, impact, flicker, bounce, recoil, wobble, reflow, or camera shake.